Thursday, April 4, 2013

Getting a handle on it...

My next task will be to attach the door pulls.  They are small Ebony blocks with a slight back bevel on the outside edge.  I am considering three options.

First option is for the pulls to be aligned with the plugs on the center stiles.

Or moved just a bit inward.

Final option, which I think is what I am going to go with is to have the pulls close to the inner edge of the stiles so that they almost apear as a single piece. 
End view of the profile on the pulls.  They were made from left over plug blanks.  The bevel was  cut with a small block plane and then they were sanded up through the grits the same as the plugs.  I think I am going to use round toothpicks as mini dowels to attach there.

No comments:

Post a Comment